Blue Lagoon Inox UV-C Stainless Steel UV Steriliser

Inox UV-C is a UV-C system with a housing made entirely of AISI 316L stainless steel, positioned by Blue Lagoon as the main disinfection unit for high-end and commercial pools, and it is made in the Netherlands. The lamp inside the reactor produces UV-C radiation at a wavelength of 253.7 nm; it inactivates bacteria, viruses, algae and fungi (e.g. Legionella and Cryptosporidium) and breaks down floating algae, improving water clarity.

The high-frequency electronic ballast absorbs current fluctuations in the mains, protecting the lamp and providing a stable power supply. The stainless steel reactor reflects the UV-C radiation, increasing efficiency by up to 35%. Two models are available: 75 W with a Philips TUV 36T5 HO 4P-SE lamp and 130 W with a Philips TUV 130 W 4P-SE amalgam lamp; amalgam lamps maintain high UV-C output over a wide temperature range.

The flow switch automatically turns the lamp off when the water flow is insufficient. The integrated, adjustable time meter tracks lamp operating hours and gives a digital alert when replacement is due. According to manufacturer data, UV-C pre-disinfection can reduce the pool's chlorine demand by 50–80%; a residual free chlorine level must still be maintained in line with regulations.

The unit is installed with a 2" male thread connection directly after the filter, before the heater and the chemical dosing points; installation and maintenance are easy. The 75 W lamp lasts 9,000 hours and the 130 W amalgam lamp 12,000 hours. The earthing of the stainless steel housing must always be checked.