Muro Series Stainless Steel Pool Ladder (AISI 304)

The Muro Series Stainless Steel Pool Ladder (AISI 304) is bent from Ø43 mm AISI 304 stainless steel tube and supplied 51 cm wide, together with escutcheons and mounting parts. In the Muro Series ladder, the handrails clear the coping stone with a tight bend and run down parallel to the pool wall (A = 420 mm, height above deck B = 685 mm). The distance the handrails project beyond the edge is much shorter than in the Standard series (G = 200 mm); this saves space on the pool deck and gives the ladder a neat look close to the wall. It suits pools with narrow decks and areas where the walkway should remain uninterrupted.

For each number of steps there are three step types: stainless steel anti-slip steps (ATS HKE005–008), stainless steel steps (-S codes) and plastic steps fitted to the stainless steel frame (-P codes). The step spacing is a constant C = 250 mm; depending on the number of steps, the in-pool depth dimension D rises from 650 mm (2 steps) to 1400 mm (5 steps). The ladder is chosen according to pool depth: the bottom step should remain at a depth where the user can step on it comfortably without reaching the pool floor.

AISI 304 (1.4301) grade is an economical and practical choice for residential, villa and hotel pools using chlorine disinfection. For salt-electrolysis, seawater-fed, thermal or heavily chlorinated indoor pools, the molybdenum-bearing AISI 316 version is recommended against chloride-induced pitting corrosion.